You might have already received a quote, done some research, and heard that solar is a good choice in Australia. That’s correct, but not everyone tells you that how well your panels work depends a lot on where you live, which way your roof faces, and whether your panels get any shade during the day.
If your system isn’t performing as well as you hoped, or if you’re seeing different numbers for two properties, there’s a reason for that. Solar output depends on more than just the panels. Local factors play a big part, and your installer should explain these from the beginning.
At PSC Energy, we install solar systems throughout NSW and often meet homeowners who were told their system would work well, but not why it might not.
This article covers the main factors that affect solar panel performance in Australia, explains what the numbers mean, and shows how you can get the best from your system.
What Are Peak Sun Hours and Why Do They Affect Solar Panel Performance in Australia?
“Peak sun hours” doesn’t mean all the daylight hours. It’s the number of hours each day when sunlight is strong enough to produce 1,000 watts per square metre. That’s when solar panels work at their best.
This number changes significantly depending on where you live:
- Darwin: approximately 5.5 to 6.5 peak sun hours per day
- Brisbane: approximately 4.5 to 5.5
- Sydney: approximately 3.9 to 4.5
- Melbourne: approximately 3.5 to 4.0
- Hobart: approximately 3.0 to 3.5
A 6.6kW system in Darwin will produce much more electricity each year than the same system in Hobart, even if the panels are exactly the same. The main reason is location. That’s why your system size should match where you live, not just a national average.
How Roof Orientation Affects Solar Panel Performance in Australia
In Australia, panels that face north make the most electricity throughout the year. Because Australia is in the southern hemisphere, the sun travels across the northern part of the sky. North-facing panels get the most sunlight each day.
East and west-facing panels still work, but they produce less:
- East-facing panels capture morning sun only.
- West-facing panels capture afternoon sun only.
- Either direction typically produces around 15 to 20 per cent less than north-facing over a full year.
- South-facing panels in Sydney can produce 30 to 35 per cent less than a north-facing system.
The angle of your roof is important too. The best tilt is usually about the same as your latitude. For example, Sydney is at 34°S, so a 34° tilt works well there. Steeper roofs perform better in winter, while flatter roofs are better in summer. Flat roofs can use tilt-mounting frames, but these cost extra and need space between rows to prevent shading.
If you’re interested in learning a bit more about which way to point your solar panels, you might want to check out the following article titled, Which Way Should Solar Panels Face in Australia?
Why Shade Hurts Solar Panel Performance More Than You’d Expect
Shade is often misunderstood when it comes to solar output. Many people think that if just one panel is shaded, only that panel loses power. But with a traditional string inverter, that’s not the case.
With a string inverter, all the panels are connected in a series. If one panel is weaker, it limits the output of all the others. It’s like a chain—if one link is weak, the whole chain slows down. Even a small shadow from a tree, antenna, or nearby roof can lower your system’s output.
The real impact of shade on a string inverter system:
- 10% shade on one panel can reduce the output of the entire string by up to 50%.
- Morning or afternoon shade from a neighbouring roof is enough to meaningfully affect production.
- Seasonal changes in sun angle shift shade patterns throughout the year, so a roof that looks clear in summer may cast heavy shade in winter.
Microinverters solve this problem by giving each panel its own inverter, so they work on their own. If one panel is shaded, the others keep working at full power. For roofs with unavoidable shade, microinverters can really increase your yearly output.
How Weather and Climate Affect Solar Panel Performance Across Australia
Most people know that clouds reduce solar output, but many are surprised to find out that heat does too.
Solar panels are tested at 25°C and 1,000W/m² of sunlight. Australian summers are often much hotter than 25°C. When panels get hotter, they produce less power. Most panels lose about 0.35% to 0.45% for every degree above 25°C. On a 40°C day, this means a drop of about 5 to 7 percent.
Other weather factors that reduce output:
- Cloud cover: diffuse light still produces some electricity, but production drops significantly on overcast days.
- Dust and grime: panels in dry inland regions accumulate soiling faster, which blocks light and reduces output.
- Coastal air: salt and humidity cause panels to get dirty faster and may require more frequent cleaning.
- Extreme weather: storms and hail cause temporary output drops even without physical damage.
Overall, the outlook is still very good. Australia gets more solar energy per square metre than almost anywhere else. Even with heat loss, changing seasons, and weather, solar systems here usually perform better than those in most European countries.
If you’re interested in learning a bit more about how weather affects solar panels, you might want to check out the following article titled, How Does The Weather Affect Your Solar Panels?
How Your Location Across Australia Affects Seasonal Solar Performance
The further south you live, the bigger the difference between summer and winter solar output. Darwin, close to the equator, gets steady sunlight all year. In Melbourne, winter means shorter days, a lower sun, and much less production.
What this difference looks like in real numbers for the same 6.6kW system:
- Brisbane: approximately 10,500 kWh per year
- Sydney: approximately 9,500 kWh per year
- Melbourne: approximately 8,500 kWh per year
- Hobart: approximately 7,500 kWh per year
Winter doesn’t make solar useless in southern Australia. But it does mean you should size your system with winter output in mind. This is especially important if you’re adding a battery and want to cover your evening use during June and July, when days are short and production is lowest.
How to Maximise Solar Panel Performance Regardless of Your Location
Your location affects your output, but it isn’t the only thing that matters. A well-designed system takes all these factors into account and makes up for them where possible.
What makes the biggest difference:
- Size for your location: Use your specific peak sun hours, not a generic average. A good installer models your annual output before recommending a system size.
- Think carefully about panel direction. If your roof has more than one side, split your panels to catch sunlight for more of the day. Put most panels on the north side, and use the west side to catch the afternoon peak, which often matches higher usage times.
- Use microinverters or power optimisers on shaded roofs: Don’t let one problem panel reduce the output of your whole system.
- Look at the temperature coefficient. Panels with a lower temperature coefficient (closer to -0.30%/°C) work better on hot days. Ask your installer to compare the specs before you choose a panel.
- Clean your panels regularly, especially if you live in a dusty area or near trees. Dirty panels can lose 5 to 15 percent of their output.
- Plan for seasonal changes. If you’re adding a battery, size it based on winter performance, when daily production is lowest.
If you’re interested in learning a bit more about solar panel efficiencies, you might want to check out the following article titled, How Efficient Are Solar Panels? Shade, Heat, and Seasonal Considerations in NSW, Australia.
Wrapping Up: Location, Location, Location… Output
Solar output isn’t the same everywhere in Australia. Where you live, your roof angle, shade, summer heat, and system design all affect your results. Knowing about these factors helps you ask the right questions before you buy and troubleshoot problems if you already have a system.
The key points from this article:
- Peak sun hours range from around 3.0 in Hobart to 6.5 in Darwin, and your system size should reflect your specific location.
- North-facing panels produce the most in Australia; east- and west-facing panels produce around 15-20 per cent less.
- Shade affects string inverter systems far more severely than most homeowners realise
- Heat reduces panel output, and panels with a lower temperature coefficient handle Australian summers better.
- Southern states experience stronger seasonal swings and need systems sized with winter output in mind.
- The right inverter type, panel spec, and orientation can offset many location disadvantages.
If you want to know exactly how much a solar system could produce at your home, contact PSC Energy. We’ll check your roof, your location, and your energy use before recommending a system.
If you’re interested in learning a bit more about shopping for a solar system, you might want to check out the following article titled, 6 Mistakes to Avoid When Buying Solar.
FAQ: Solar Panel Performance in Australia
Does solar panel performance in Australia vary significantly by state?
Yes, it does. States in the north get more peak sun hours and more steady output all year. Southern states have bigger seasonal changes. The difference in yearly output between Darwin and Hobart for the same system size can be more than 30 percent.
Why is my solar system underperforming compared to my neighbour’s?
There are a few reasons this could happen. Your roof might face the wrong way, you could have more shade from trees or buildings, your system might be too small for your needs, or your panels could be dirty. For a north-facing system in Sydney, you should get about 3.9-4.2 kWh of output per kW of installed capacity per day, on average over the year. If you’re always below that, it’s worth looking into.
Does heat reduce solar panel performance in Australia?
Yes. Panels are rated at 25°C, and for every degree above that, output drops by about 0.35 to 0.45 percent. On a hot day, you might lose 5 to 7 percent of your output. Panels with a lower temperature coefficient handle heat better, and good roof ventilation helps keep them cooler.
Does solar panel performance drop in cloudy or rainy areas of Australia?
Panels still work when it’s cloudy, but they produce less power. Diffuse light still makes electricity. If you live in a cloudy area, you’ll need a bigger system to get the same amount of energy. Places with lots of cloud cover may need a system 20 to 30 percent larger than a sunny inland area to produce the same yearly output.
What roof orientation gives the best solar panel performance in Australia?
North-facing panels set at an angle close to your latitude give the best results all year. West-facing panels are helpful if you want more power in the afternoon, which matches peak household use and higher electricity rates in some areas. Splitting panels between east and west can also outperform a small north-facing setup by catching more sunlight during the day.
Does shade from a neighbouring building affect solar panel performance in Australia?
Yes, and it’s often a bigger issue than most people expect. With a string inverter, even one shaded panel can lower the output of your whole system. If your roof gets shade from a nearby building at any time, ask your installer about microinverters or power optimisers before choosing a string inverter system.